  04/17/8903:53 pmmario     EUT7.5B                                 OWNER
1. read
2. write
3. execute
OTHERS
4. read
5. write
6. execute P    MAI BASIC FOUR, INC.

------------------------------------------------------------------------------- <    Type number of selection, <RETURN> to end:   F    Type number to change selection, <RETURN> when all are correct:  <    Filesystem Free Space Utility     REPORT TYPE
summary
full P    The filesystem description block is bad.  This tool is restricted.   <    Directory Display Utility     Working directory:   <    Type working directory, <RETURN> for no change:       DIRECTORY
current
other     FILE SELECTION
all files
selected files     REPORT DETAIL
names only
file attributes     REPORT DEVICE
terminal
printer
file (    Type report file name:   <    Type printer name, <RETURN> for default:   P    REPAIR SUCCESSFUL     yes
YES
y
Y F    Type <RETURN> to proceed:   F    Proceed? (yes/no):       DIRECTORY RANGE
directory only
all sub-dir.     no
NO
n
N I    The file already exists.  Replace it? (yes/no):      DUPLICATES
replace
skip
ask user <    Save to Diskette Utility <    Restore from Diskette Utility <    Report Save Diskette Contents Utility <0000Type file name:  F    File name is too long, type <RETURN> to re-enter:  (    Type the directory name:  
    DIRECTORY
PATH NAME 
    FILE
NAME     FILE
TYPE     KEY
SIZE     REC.
SIZE     MAX.
REC.     REC.
USED     BLOCKS
USED P    SAVING FILELIST <    Type number of selection:   P    Because you chose not to repair the filesystem, you cannot use this tool. <    Type device name:   <    Filesystem "%s" is mounted on "%s" <    "%s" unmounted <    Mount & Unmount Filesystem Utility F    Unexpected end of file on "%s". F    Input/output error. F    Bad sector on "%s". <    Program "%s" is too large to fit in memory. P    File/directory "%s" does not exist. <    Illegal attempt to open file "%s". P    No file descriptors/inodes are available. P    This program has opened too many files. <    File "%s" is not open. <    Illegal file name "%s". <    Bad filesystem format on "%s". P    Not enough space in filesystem.  Insufficient blocks or file descriptors. <    Incorrect program format in file "%s". F    "%s" is not a directory.  This operation requires a directory. <    Invalid path name for file/directory "%s". <    Cannot delete directory "%s".  It is not empty. <    "%s" is a directory. <    Illegal attempt to write to directory "%s". <    No space available to mount filesystem "%s". <    "%s" is not a device. P    The device is busy. <    Directory "%s" is not mounted. P    No swap space available. P    No more process slots or process does not exist. <    "%s" is not a file. <    File/directory "%s" is locked. <    Unknown device "%s". P    Illegal operating system call. P    Illegal address. P    Illegal byte count. <    Cannot addname or rename file "%s" across filesystems. <    File "%s" already exists. P    Illegal wait request. <    Illegal eventcount operation on "%s". P    One or more of the file parameters are illegal. P    Illegal file or device operation. P    No eventcall slots available. <    Read permission denied on "%s". <    Write permission denied on "%s". P    No pipe structures available. P    Illegal pipe operation. <    Access permission denied on "%s". <    FILE CREATED <    Create BASIC Program Utility P    Invalid memory address. P    The current system call ended prematurely. N    <RETURN> to skip, <CTL-II> to retry, <CTL-IV> to abort, <HELP> for help:  N    <RETURN> to skip, <CTL-IV> to abort, <HELP> for help:  N    <RETURN> to continue, <CTL-IV> to abort, <HELP> for help:  N    <RETURN> to retry, <CTL-IV> to abort, <HELP> for help:  N    <RETURN> to abort, <HELP> for help:  F    Unknown error.  Error number %d. <    Create Directory Utility P    SORTING LIST <00051. Add
2. Delete
3. Display
4. Sort
5. Save
 F    Delete all files in the working directory? (yes/no):  <    Type name of file to copy, <RETURN> to end:  P    This field does not apply to inodes that are not keyed. F    Type the link to the second inode:  <    The type is  <    Delete File Utility <    Type name of file to delete, <RETURN> to end:  P    File not found F    Delete file "%s"? (yes/no):  F    Delete the selected files? (yes/no):  <    Rename File Utility <    Type name of file to rename, <RETURN> to end:  <    Type new file name:      The modes are  (    "%s" has been renamed "%s" <    Move File Utility <    Type name of file to move, <RETURN> to end:  P    The file is a keyed file.  This field has no meaning for a keyed file. <    The BASIC file types are:
   string
   index
   serial
   sort
   direct
   keyed
   program
   encrypted program     Moving: %s    To: %s <    Delete Directory Utility O    File open failed     WORKING (00031. Mount a filesystem
2. Unmount a filesystem
3. Display mounted filesystems
 P    Attempt to read file status failed. F    The current link to the second file descriptor is %d. N    Insert source diskette.  Type <RETURN> to proceed:  N    Insert destination diskette.  Type <RETURN> to proceed:  P    Too many files or directories. I    Do you want to build the filesystem with these parameters? (yes/no):   <    Submit Print Job Utility P    Attempt to map a file that has not been added to shared memory. P    No more shared memory is available. <    Maintain Print Queue Utility P    Illegal operation on a remote file. P    <CTRL>+"x" was typed. P    Illegal mnemonic instruction. 0    String P    Keyed file "%s" is corrupted.  P    Illegal format for terminal function definition file in "/etc/ttycmds". P    Revision level of terminal mnemonics file in "/etc/ttycmds" is incorrect. P    The directory is busy. P    Seek error on disk or diskette. P    There is not enough memory to run this program. P    Timeout error occurred. P    Attempt to add a name to a file that already has the maximum number of names. P    Attempt to write to a filesystem that was mounted for read only. P    Cannot perform record lock.  All the lock table entries are busy. P    The record lock instruction is rejected in order to avoid deadlock condition. P    Terminal I/O buffer overflow.  Keyboard or display characters were lost. P    Attempt to access a file that is reserved for system use. I    The filelist already exists.  Replace it? (yes/no):  <    Filelist Maintenance Utility <00041. Create
2. Modify
3. Delete
4. Display
 P    Illegal filelist name. I    The filelist already exists.  Do you want to modify it? (yes/no):  I    The filelist does not exist.  Do you want to create it? (yes/no):  D    Type filelist name:      SORT
no
yes P    Filelist not found. I    Delete the filelist? (yes/no):      RANGE
all
selected     DETAIL
contents
names only E    Type filelist name or <RETURN> to end:  P    Edit list of names <00041. Add
2. Delete
3. Display
4. Sort
 <    Type a file or filelist name to add, <RETURN> to end:  <:   Type a file or filelist name to delete, <RETURN> to end:  I    Is this a filelist? (yes/no):  P    System call error. P    Duplicate file name N    Type <RETURN> to continue, <CTL-IV> to end display:  N    End of list.  Type <RETURN> to continue:  <    Filelist "%s" is empty.  Type <RETURN> to continue: <0000File not in list P    Invalid key found in file "%s". P    file names added P    file names deleted <    File name deleted:  P    Illegal filelist name. P    List is empty.  Type <RETURN> to continue:  P    Attempt to use an illegal record index value to access file "%s". 6    File "%s" already exists.  Replace it? (yes/no):  <    Message & Help File Editor A    Type name of message index file, <RETURN> = /util/utmsg.ind:  A    Type name of message text file, <RETURN> = /util/utmsg.txt:  <00061.  Add
2.  Modify
3.  Delete
4.  Display
5.  Rebuild index file
6.  Modify header
 N    Type <RETURN> to add this message, <CTL-IV> to end:  A    Next available message number is  P    Type message text:  N    Release levels are not the same.  Type <RETURN> to continue:  A    Message number  I    Delete this message? (yes/no):  A    Type number of message to delete, <CTL-IV> to end:  P    The file cannot be locked. <    Type file attributes:  F    File type (1=sort, 2=direct):  F    Key size:  F    Number of keys A    Number of records:  A    Record size:  A    Initial extent (sectors):  A    Growth extent (sectors):  P    Buffer overflow. P    An illegal file type was specified. P    Attempt to read a non-existent record index from file "%s". P    The specified key is not found in file "%s". P    Illegal file parameter.  Record length is negative. I    All data on the diskette will be lost! Proceed? (yes/no):  N    Insert diskette number %d, <RETURN> to proceed:  N    This diskette is full. 
Insert another diskette, then type <RETURN> to proceed:  N    Insert the LAST diskette of the save set, then type <RETURN> to proceed:  N    This is not a SAVE diskette. 
Insert correct diskette, then type <RETURN>:  P    PRE-PROCESSING  P    SORTING  P    SAVING:  <    already exists     deleted P    COPYING SAVE DIRECTORY P    Duplicate key. P    Attempt to mount (ENABLE) a filesystem that is already mounted. P    RESTORING  <    Type name of directory to rename, <RETURN> to end:  <    Type the new file name, <RETURN> for no change:  P    Invalid directory name. P    DIRECTORY RENAMED  P    Cannot rename the directory. P    Directory already exists. <    Type name of directory to create, <RETURN> to end:  P    DIRECTORY CREATED  <    Type name of directory to delete, <RETURN> to end:  P    DIRECTORY DELETED  <    Rename Directory Utility N    This is not the LAST diskette of the save set.
Insert the correct diskette, then type <RETURN> to proceed:  2    not found <    Report Save Diskette Contents Utility     DELETING:  %s <    Copy Diskette Utility I    WARNING:  All information on the destination diskette will be lost.
          Proceed with copy? (yes/no):  <    Source diskette device:  <    Destination diskette device:  P    Diskette devices:  P    Not enough free space in filesystem. F    The source and destination diskettes must be switched %d time(s). <    Device "%s" is busy. P    WARNING:  First 8 blocks of source and destination diskettes are identical.
          Proceed with copy? (yes/no):  P    Switch the diskettes. I    Are you sure this is the correct destination diskette? (yes/no):  P    COPY COMPLETE  P    COPY DID NOT COMPLETE P    Illegal calling parameters for "edlst" subroutine. P    Duplicate file handling P00041. Replace current file
2. Do not restore
3. Don't ask again: always replace
4. Don't ask again: always skip <    Type directory name, <RETURN> to end:  F    Type number of selection, <RETURN> to replace:  <    Type the new name:      RENAME FILES
no
yes A    Type number of message to modify, <CTL-IV> to end:  F    Type maximum line length (<RETURN> = 80 char.):  F    Type special purpose field (4 characters):  <    Display another page? (yes/no):  I    Save this message? (yes/no):  P    **end of message** (    Message  Special  Text
Number   Purpose A    Type starting message number or <RETURN> for first message:  A    Type ending message number or <RETURN> for last message:  P0003REPORT DEVICE
  1. terminal
  2. printer
  3. file P    Attempt to unmount (DISABLE) a filesystem that was not mounted (ENABLEd). <    Type report file name:  I    Rebuild the index file? (yes/no):  <    Copy File Utility     Diskette
Number 
    File
Size     File name 2    MODIFY FILELIST P    CREATE FILELIST P    DISPLAY FILELISTS P    DELETE FILELIST     Name     Contents <    Unknown mnemonic function "%s". P    Invalid message format for "dmu" subroutine. <        File status:  <        Date last edited:  <        Time last edited:  <        Edited by:  <    1.  Revision code:  <    2.  Remark:  I    Type <RETURN> to continue:  P    Cannot access message files "/util/utmsg.txt" and "/util/utmsg.ind". F    Type revision level, <RETURN> for no change:  P    Type remark, <RETURN> for no change:      Device     directory P    No mount information is available. F    Type number of item to change, <RETURN> for no change:      -- 
    Device: %s P    No files were saved. <    Type save set name:  P    BUILDING LIST OF FILES P    SORTING LIST OF FILES <    Working directory used to save:  <    File "%s" is an incomplete file. I    Restore this file? (yes/no):  <    Save set name:  <    Diskette number:  P    End of tape. P    Data transfer error or seek error occurred on disk or diskette. <    User name:  <    Date written:  <    Time written:  <    Type device name, <RETURN> to end:  
    Starting
Block # 
    Size in
Blocks     Blocks in
Filesystem     Number of
Free Blocks     % Used     % Free     Maximum Number of
File Descriptors     Number of Free
File Descriptors 
    Complete
File (    Type search string:  (    MSG    MAX   SPC   MESSAGE
NUM    LEN   PUR
 A    Current maximum line length:      File:  <    Type destination directory, <RETURN> for working directory:  (    COPYING: %s   TO: %s     FILE SELECTION
single file
all files
selected files     direct     directory (    indexed     BASIC program     serial     sort     string     FILE NAME     FILE TYPE     ENCRYPTED P    Illegal attempt to format a non-existent disk partition or filesystem. P    An <ESCAPE> or <CTRL>+"c" was typed.     RECORD SIZE (bytes)     MAXIMUM RECORDS     records     bytes     blocks     keys     EXTENT SIZE(records)     EXTENT SIZE (bytes)     initial     ACTUAL FILE SIZE     KEY SIZE (bytes)     FILE OWNER     ACCESS PARAMETERS     owner     others     LAST MODIFIED     NUMBER OF NAMES     program bytes     file bytes     file blocks <    longest line in message:      MAXIMUM KEYS     MAXIMUM PROGRAM SIZE 
    remote I    No date and time formats available.  Type <RETURN> to continue:      Date:      Time:      Date format:      Clock format:  P0003Date & time function
     1. Set date
     2. Set time
     3. Set date & time format F    Type year number, <RETURN> for no change:  <    Type month name or number, <RETURN> for no change:  P0003Date format
     1. month/day/year
     2. day/month/year
     3. year/month/day P0002Clock format
     1. 12-hour clock
     2. 24-hour clock <    Date & Time Utility F    Type day number, <RETURN> for no change:  <    Type time in format hhmm, <RETURN> for no change:       January
February
March
April
May
June
July
August
September
October
November
December <    File "%s" already exists P    Cannot move or copy a file to itself. P    Destination directory = source.  Cannot move or copy a file to itself.     VERIFY
no
yes P    Files Copied P    Files Moved P    Files Deleted P00031. Restore partial file
2. Skip file
3. Abort
 N    Insert another diskette, then type <RETURN>:  P    Cannot access the diskette. P    Device "%s" is not ready or not on-line. P    growth P00031. Save partial file
2. Skip this file
3. Abort
 I    Delete this directory? (yes/no):  <    File Information Utility <    Type file name, <RETURN> to end:  P    Illegal file name.     EXTENT SIZE(keys) P    Illegal file type. <    none x w w,x r r,x r,w r,w,x F    Insert diskette number %d to skip this file, then type <RETURN>:  N    Insert diskette number %d to record information about partial file.
Type <RETURN> when ready:  N    Diskette error
Insert another diskette, then type <RETURN> when ready:  P    Disk error F    am or pm?  Type <RETURN> for no change:  N    Insert diskette number %d in order to skip this file.
Type <RETURN> when ready:  P    Cannot unmount the filesystem.  The original diskette is not in the drive. N    Insert diskette number %d to continue with the next file.
Type <RETURN> when ready:  N    Only the system administrator can execute this function.
Type <RETURN> to continue:  D    Type filelist name ending with ".f", <RETURN> to end:  N    Illegal or incorrect device name
Type <RETURN> to re-enter:  P    CREATING TEMPORARY FILE  F    COPYING.  PHASE NUMBER %d.  N    This diskette is not the original destination diskette.
Type <RETURN> to proceed:  N    This diskette is not the original source diskette.
Type <RETURN> to proceed:  P    The device is not a filesystem. F    Filesystem device "%s" is already mounted.  0000DELETED <    Display BASIC Program Names Utility P    COPYING  <    Cross Reference Options
1.  Program listing
2.  Variables
3.  Arrays, functions, system variables, field variables
4.  Statement numbers
5.  Directives
6.  Global variables
7.  Formatted listing <    BASIC Program Cross-Reference Utility <    BASIC Program String Search & Replace Utility <    Compare BASIC Programs Utility <    BASIC Program Renumber Utility <    Merge BASIC Programs Utility <    File "%s" was restored as a partial file. <    1. Keep partial file
2. Restore original file
3. Abort <    Is this the correct save set? (yes/no):  P    The filesystem was not properly unmounted. K    Type number of selection, <RETURN> for terminal:  N    Type <RETURN> for next page, <CTL-II> for previous page, <CTL-IV> to end:  N    Type <RETURN> to continue, <CTL-II> for previous page:  N    Type <RETURN> for next page, <CTL-IV> to end:  P    No help is available. N    Type number of selection, <RETURN> for no change:  <    Name:   <    Type:   <    Key size:   <    Number of records:   <    Initial extent size:   <    Growth extent size:   <    Maximum number of blocks:   <0006File type
    1. index        4. sort
    2. serial       5. BASIC program
    3. direct       6. string <    Type key size (2-56):  F    Type record size (1-32767):  F    Type number of records (1-8388607):  F    Type file size (1-63 blocks):  P0000Use standard test error code? (yes/no):  P0000SIMULATED ERROR N    Are the file parameters correct?
Type number of parameter to change or <RETURN> to define file:  <    Record size:  P    Illegal function was requested. P    An invalid logical unit number was used by this program. P    PROGRAM COMPLETED  P    This program has opened too many files. P    Illegal parameter(s) in system call. P    No BASIC program files were found. 
    PGM
ID 
    PGM
SIZE P    The file or device was not locked. <    Change File Security Utility P    Invalid file type     device     eventcount     BASIC program, encrypted <    Filesystem Error Analysis Utility 
    Inode # P    Type P    Size P    Device P    Directory P    Modes P    Flags P00291.  Get inode          11. Set # of records used   21. Build filesystem block
2.  Set size           12. Set mode                22. Modify a block
3.  Set type           13. Set parent              23. Write magic number
4.  Set device         14. Set owner ID            24. Set block map address
5.  Set file number    15. Set reference count     25. Set number of blocks
6.  Set flags          16. Set link to 2nd fd      26. Set inode map address
7.  Set size of rec.   17. Delete inode            27. Set number of inodes
8.  Set max # of rec.  18. Convert number          28. Set the inode space
9.  Set inode block    19. Move a block            29. Set the block space
10. Set time           20. Swap two blocks          P    Attempt to access a file or device that has been locked by another program. P    This program can analyze the filesystem automatically or with user direction. I    Perform automatic filesystem analysis? (yes/no):  P    Only the system administrator can repair a filesystem. <    Type the inode number:  <    Enter type number (0-7):  <    Type major device number:  <    Type file number:  <    Type flag number:  <    Type file number:  <    Type the record size in bytes:  <    Type the size:   <    Type the maximum number of records:  (    Which element:   (    Type the number:  <    Type the time:  <    Type the mode:  <    Type the number of records written:  (    Type the parent:  <    Type the owner's ID number:  <    Type the reference count:  <    Type number of block to modify:  <    WRITING MAGIC NUMBER A    Where does the block bit map start? (in blocks):  F    Type the number of inodes:  A    Type the starting block number of the inode space:  A    Type the starting block number of the block space:  A    Type the source block number:  A    Type the destination block number:  A    Type the first block number:  A    Type the second block number:  A    Bad format for filesystem header. P    WRITING REFERENCE MAP P    CHECKING BLOCK MAP P    CHECKING REFERENCE COUNT A    Type a number:  N    Type <RETURN> to continue:  F    Repair the filesystem? (yes/no):  A    Current inode number is %d P    An inode has not been selected. A    %d is larger than the number of inodes in the filesystem.     FILE TYPE
unused
small
large
contiguous
unbuffered device
buffered device
huge
eventcount
remote P    The inode type is unknown.  Its type will be set to unused. P    The mount table "/etc/mounttab" is missing. P    The program attempted an operation that requires a BASIC program file. P    Attempt to save a program that is ADDRed. P    Cannot save the program.  The program file is too small. I    Set the time modified to the current time? (yes/no):  A    The current time is %s. A    This inode was last modified on %s. F    Current major device number is %d, minor device number is %d. F    Type minor device number:  A    File number is %d. <    The flag %d (decimal) or %x (hexadecimal) means  P    Record input buffer was too small. P    No BASIC program file has been loaded. P    Fatal write error occurred on diskette. P    An invalid logical unit number was used in an ADDed (public) program. P    The requested program has not been ADDed to shared memory. P    Attempt to ADD a program that has already been ADDRed. P    The specified file has not been ADDRed. P    Attempt to save a program to an illegal file type or to a device. A    The record size is %US. <    The size of the file is %d. A    The maximum number of records is %d. <    The block numbers in the small map are  <    Time modified is %s (%d). <    The modes %d (decimal) or %x (hexadecimal) mean  A    The actual number of records written is %d. A    Parent is %d. <    The owner's ID number is %d. A    The reference count is %d. A    Type "." to end, <RETURN> for more, or byte number to change:  <    Byte %d is 0x%x (hexadecimal) or  A    The block bit map starts at block %d. A    The number of blocks is %d. A    The inode bit map starts at block %d. A    The number of inodes is %d. A    The inodes start at block %d. A    The blocks start at block %d. P    SEARCHING INODES P    No memory available. A    File numbers do not match in inode %d. A    Invalid inode type %d. <    Inode %d is an illegal directory type %d. <    Found an illegal reference to inode %d in inode %d. A    Found reference to unused inode %d. A    Inode %d is larger than the number of inodes in the filesystem. A    Inode %d is marked as used in the bit map, but it is not used. A    Unknown inode type %d. <    Inode %d contains an illegal block number %d. <    Block %d is referenced in more than one inode. A    Deleting inode %d. A    Block %d is marked as unused in the bit map, but it is used. A    Block %d is marked as used in the the bit map, but is not used. A    Inode %d is marked as unused in the bit map, but it is used. P    DELETED <    Inode %d was found %d times but was referenced %d times. P    Cannot add to root directory. F    Invalid type %d for root directory. I    Delete block from inode? (yes/no):  I    Delete this inode? (yes/no):  P    You must delete either the block or the inode. F    SEARCHING DIRECTORIES for unused inode %d <    Cannot check %d type directory for inode %d. F    Invalid extent size in inode %d. 2    %d (decimal) = %o (octal) or %x (hexadecimal). 	    UNUSED 	    SMALL 	    LARGE 	    CONTIG 	    UNBUF 	    BUF 	    HUGE 	    EVENTCNT P    The file "%s" is corrupted. P    Attempt to write to file "%s" without specifying key. P    INVALID NUMBER. 
    File #  0000DELETED F    Type number to change security, <RETURN> to end:  <    Type name of file owner, <RETURN> for no change:  F    Type number to change access parameters, <RETURN> to end:  <    File name:  <    File owner:  <    File access parameters:  N    File not found.  Type <RETURN> to enter another name:  <    Change Directory Security Utility <    Directory name:  P    The configuration file "/etc/bfsdsk" is missing. P    Invalid time and/or date format. P    A size parameter was missing from a program instruction. P    The diskette or tape device is write protected. P    This program attempted to open the terminal. <0010The flags are 
1.  Modified
2.  Busy
3.  Delete
4.  Directory
5.  Mounted
6.  Locked
7.  Inode locked
8.  Version 2
9.  Directory locked
10. Not usable P    (ASCII) "." to end, change to  A    Type the number of blocks:  A    Type the block address of inode bit map:  F    Inode %d is not marked in the bitmap but is used. I    WARNING:  Files or data might be lost.  Proceed? (yes/no):  P    Encrypted P    eventcount P    Type inode string P    device, unbuffered P    device, buffered P    BUFFERED P    MAJOR NUMBER P    MINOR NUMBER P    EVENTCOUNT NUMBER P    system eventcount P    user eventcount P    You are not allowed to access this selection.  Type <RETURN> to continue:  P    This program attempted to restart an audit trail. <    Change Working Directory Utility P    Keyed file "%s" is corrupted. P    REPORT IN PROGRESS I    Type number to change option, <RETURN> when correct:  <    Type name of program to compare:  <    Type name of directory to compare:  <    Type name of merge program (destination):  P    The requested printer was not found.     INCREMENT
10
specified     RANGE
entire program
specified <    Type name of program to renumber:  F    Type line number increment (<RETURN> = 5):  F    Type first line number of range:  F    Type last line number of range:      no protocol     ACTION
search only
search & replace
pause on match     SCOPE
literals only
BASIC code only
all occurrences <    Type name of file to be searched:  ,    Type search string (35 char. max.):  ,    Type replacement string (35 char. max.):  I    Search for variables only? (yes/no):  <    Type name of file to cross-reference:  P    Invalid search string. P    No files were specified for processing. P    Invalid line number increment. P    Invalid line number range.     X-ON, X-OFF     DTR <    Type name of output file:      X-ON, X-OFF, DTR     Modem <    Create File Utility A    Type number of selection or desired menu name:      Cannot open  P    Enter another menu name N    <RETURN> for previous menu, <CTL-III> for logon menu, <CTL-IV> to abort P    Menu Display <    MAI BASIC FOUR, INC. F    The menu does not contain option %d <    Pascal Compile & Link Utility     SOURCE LISTING
yes
no     PERFORM LINK
yes
no     LOAD MAP
yes
no (    SOURCE FILE (    LISTING FILE (    UNLINKED OBJECT FILE (    LINKED OBJECT FILE (    LOAD MAP FILE <    Type name of file to be compiled:  P    Invalid number.  Value out of range.  0000DELETED  0000DELETED  0000DELETED  0000DELETED N    No action is defined for this selection.  Type <RETURN> to continue:  <    Printer Parameters Utility F00031. Maintain print control defaults
2. Maintain class definitions
3. Maintain form definitions <    MAINTAIN PRINT CONTROL DEFAULTS F00041.  Create
2.  Modify 
3.  Delete
4.  Report F    CREATE PRINT CONTROL DEFAULTS <    Type an operator name, <RETURN> to end:  P    Operator name cannot be longer than 20 characters. P    Operator name not found. I    The default definition already exists.
Do you want to modify it? (yes/no):  F    MODIFY PRINT CONTROL DEFAULTS  0000DELETED     Priority     Requeue     Notify     Copies     Form name F    Type number of item to change, <RETURN> to end:  K    Type queue priority (1 - 9), <RETURN> for no change:  P    The default printer is not defined. P    Only the system administrator can change the priority. I    Requeue print job upon completion? (yes/no):  I    Notify upon completion of print job? (yes/no):  K    Type number of copies to print (1-999), <RETURN> for no change:  A    Type form name, <RETURN> for no change:  P    Form name not found. I    The default definition does not exist.
Do you want to create it? (yes/no):  P    DELETE PRINT CONTROL DEFAULTS P    The "system" default definition cannot be deleted. P    Default definition not found in "/etc/defaults". I    Do you want to delete this default definition? (yes/no):  F    REPORT PRINT CONTROL DEFAULTS P    Invalid number of copies specified in print request. N    End of report. Type <RETURN> to continue:  F    MAINTAIN FORM DEFINITIONS <    CREATE FORM DEFINITION I    The form definition does not exist.
Do you want to create it? (yes/no):  A    Type a form name, <RETURN> to end:  I    The form definition already exists.
Do you want to modify it? (yes/no):  F    MODIFY FORM DEFINITION     Length (lines)     Width (characters)     Lines per inch     Printers F    Type form length (1-99 lines):  F    Type form width (1-99 characters):  F    Type lines per inch (1-9):  <    Type printer name, <RETURN> to end:  P    Printer does not exist. F    Type form length (1-99 lines), <RETURN> for no change:  F    Type form width (1-99 characters), <RETURN> for no change:   0000DELETED  0000DELETED  0000DELETED  0000DELETED F    DELETE FORM DEFINITION P    Form definition not found in "/etc/forms". P    The "stanrd" form definition cannot be deleted. I    Delete this form definition? (yes/no):  (    REPORT FORM DEFINITIONS     Modem, X-ON, X-OFF P    This printer is already included in the form definition. K    Type number of lines per inch (1-9), <RETURN> for no change:  P    The "system" default definition is not found in the "/etc/defaults" file. P    These are the available terminal names     yes     no <    Type name of destination device:  (    File size:  
    JOB 
    PRI 
    FILE 
    STATUS 
    USER 
    FORM 
    CURR
COPY 
    MODE 
    FROM
PAGE 
    TO
PAGE 
    waiting 
    stopped 
    WORKING 
    formwait 
    error 
    unknown N    Type job number for more detail, <RETURN> to continue:  P    Cannot modify a job that is printing.  The job must be stopped. <    Job %d killed. F    Type number of job to process, <RETURN> for next page:  I    Do you want to kill this job? (yes/no):  <    Change File Size Utility     Record size (bytes)     Key size (bytes)     Keys used     Records used     Actual size (blocks)     Actual size (bytes)     Program size (bytes) P    Unexpected file mark found on tape device.     Initial extent (records)     Growth extent (records)     Blocks allocated #    Type key size #    Type record size #    Type maximum number of records #    Type maximum number of keys #    Type maximum program size #    Type initial extent #    Type growth extent     , <RETURN> for no change:      PRI 	    COPY 
    REQUEUE 	    NOTIFY 0000NAME 	    LENGTH
(lines)     WIDTH
(characters) 
0000DEL     PRINTERS 2    Type job priority (0-%d), <RETURN> for no change:  2    Type form name, <RETURN> for no change:  <    Type number of copies (1-999), <RETURN> for no change:  <    Type starting page number, <RETURN> for no change:  2    Type ending page number, <RETURN> for no change:  I    Requeue the job after printing? (yes/no):  I    Delete the file after printing it? (yes/no):  I    Notify the user after the job has been printed? (yes/no):  2    Type alias for print job, <RETURN> for no change:  F    Type number of selection, <RETURN> to end:  K    Type number of selection or <RETURN> for next page:  K    Type number, <RETURN> for next page, or <CTL-II> for previous page:  K    Type number, <CTL-II> for previous page, or <RETURN> to end:  N    No help available.  Type <RETURN> to continue:  N    Type <RETURN> to continue, <CTL-IV> to end:  N    Type <RETURN> to continue, <CTL-II> for previous page, <CTL-IV> to end:  N    Type <RETURN> to continue, <CTL-II> for previous page:  P    Invalid file type.     Printer:     Hold priority:     File:     Priority:     Form:     Copies:     From page:     To page:     Requeue:     Delete:     Notify:     Alias: 
    HOLD
PRI 
    CURRENT
JOB 
    CURRENT
PAGE 
    TOTAL
JOBS 
    CURRENT
COPY 0004JOB ACTION
----------
1.  Kill
2.  Stop
3.  Modify
4.  Restart 2    Job:  A    Job %d stopped. A    Job %d modified. A    Job %d restarted. <    Printer Status Utility P    Cannot read the operator file, "/etc/passwd".   <    Please type your name:  <    Type your password:  <    Illegal user id for "%s" in operator file "/etc/passwd".  <    Could not execute "%s".   P    I do not know you. <    Home directory cannot be set to "%s". P    You have mail. <    Sign On Procedure <    WARNING:  Cannot create file "%s".     PRINTER P    These are the filesystem devices F    Type maximum line length:  <    Encrypt BASIC Program Utility <    Type name of program to be encrypted:      Initial extent (bytes)     Growth extent (bytes) P    The print queue for "%s" is empty. F    Type printer name, <RETURN> for default printer:  P    Only the system administrator or the user who submitted it can modify a job. P    Cannot open the print queue. I    The job is printing.  Do you want to stop it? (yes/no):  P    Print queue control file is missing. P    The form is not defined or the form cannot be used on this printer.  0000DELETED P    Only the system administrator or the file's owner may change its security. <    "%s" is a device. <    "%s" is an eventcount file. N    Type <RETURN> to try again, <CTL-IV> to end:  <    File Error Analysis & Repair Utility     ANALYSIS
keys only 
keys & data     REPAIR
no
yes     FILE SELECTION
single keyed file
selected keyed files
all keyed files P    Check dictionary and file sizes. 
    OK P    Check data file records. P    Check indices and key descriptions.     Index %d     Unique key P    Index %d     Duplicates P    Check data record free list. P    Check index node free list. <    %d index nodes used,  %d free. <    %d data records used,  %d free.  0000DELETED P    File is corrupted. P    Magic number is wrong. P    Invalid index record size. P    Invalid data record size. P    Invalid index file size. P    Invalid data file size. P    Cannot allocate enough memory. P    Invalid index node in key descriptors. P    Duplicate index nodes in key descriptors. P    Invalid data record. P    Invalid format for free list. P    Invalid key descriptor format. P    Duplicate index node(s). P    Invalid data record(s). P    %d duplicate data record(s). P    Data record(s) are missing. P    Index out of order. P    Invalid index node(s). P    Incorrect number of indices. P    Cannot find key for index. P    Duplicate key. P    Incorrect format for data record free list. P    Incorrect format for index free list. P    Missing index node(s). <    M68000 Assembler Utility <    Type name of source file:  <    Type name of file name, <RETURN> for default:  <    Type name of list file, <RETURN> for default:  <    Source file name is:  <    Object file name is:  <    List file name is:      MAKE OBJECT
yes
no     DUMP OBJECT
no
yes P    WARNING:  File integrity cannot be guaranteed after a repair.
          Please save the file before repairing. P    End of data encountered on tape device. P    Illegal byte count used in tape I/O operation. <    Operator Information Utility (00061. Operator name:
2. ID number:
3. Home directory:
4. Initial program:
5. Initial menu:
6. Security codes: P00051. Add an operator
2. Modify an operator
3. Delete an operator
4. Change password
5. Operator report P    ADD AN OPERATOR <    Type operator name, <RETURN> to end:  P    There is already an operator with this name. N    <RETURN> to continue, <CTL-IV> to end, <HELP> for help:  <    Type password:  <    Type password again:  <    Type operator name, <RETURN> for no change:  A    Type ID number, <RETURN> for no change:  P    This ID number is already assigned to another operator. (    Initial program P00041. Menus
2. Command interpreter
3. BASIC command mode
4. Other <    Type initial program, <RETURN> for no change:  <    Type initial menu, <RETURN> for no change:  P00021. Add security codes
2. Delete security codes F    Type security codes to add, <RETURN> to end:  F    Type security codes to delete, <RETURN> to end:  P    MODIFY AN OPERATOR P    Operator name not found in "/etc/passwd". P    DELETE AN OPERATOR N    Type <RETURN> to end:  (    1. Operator name:  (    2. ID number:  (    3. Home directory:  (    4. Initial program:  (    5. Initial menu:  (    6. Security codes:  P    Maintain operator information file <    b-tree level:  %d <    b-tree level:  %d     node:  %d     used:  %d P    FLAG   TOTLEN   KEYLEN   DUPNUM   RECPTR   LEADCNT   TRAILCNT   KEY P    Recreate index node free list. P    Recreate data record free list. A    Delete index %d A    Recreate index %d P    This file is the wrong type.  Only direct and sort files can be processed. F    %d bad index nodes. F    %d duplicate index node(s). F    %d bad data records.  0000DELETED F    %d missing data records. F    %d missing index nodes. F    Duplicate key in record %d. P    <CTRL>+"p" = up, <CTRL>+"n" = down, <CTRL>+"f" = right, <CTRL>+"h" = left,
<CTRL>+"d" = delete character, <CTL-I> = insert line, <CTL-II> = delete line,
<CTL-III> = un-delete line, <CTL-IV> = end edits.  Insert characters at cursor F    Type number of selection, <RETURN> to end:  P    You typed a number that is not in the list.  Try again. P    The menu is full.  You cannot insert another line. F    Type number of item to change, <RETURN> to end:  I    Save this menu definition? (yes/no):  <    Type name of menu set to create, <RETURN> to end:      "%s" already exists. <    Menu set:  %s (    1. Default menu in set:  %s (    2. Title of menu set:  %s (    3. Revision code:  %s (    4. Comment:  %s <    Type name of default menu, <RETURN> for no change:  F    Type menu set title (0-60 characters), <RETURN> for no change:  F    Type revision code (upto 9 characters), <RETURN> for no change:  F    Type comment (0-30 characters), <RETURN> for no change:  <    Type name of menu set to modify, <RETURN> to end:      "%s" does not exist. <    Type name of menu or menu set to delete, <RETURN> to end:  <    Type name of menu to create, <RETURN> to end:  <    Type name of menu to modify, <RETURN> to end:  P00041.  Menu options
2.  Menu action steps
3.  Menu title & security
4.  Menu help text N    Help text editor:  Type <RETURN> to continue, <CTL-IV> to end:  (    1. Menu title:  (    2. Security code:  (    3. Revision code:  (    4. Comment:  <    Type menu title (0-60 characters), <RETURN> for no change:  F    Type security code (1 character), <RETURN> for no change:  P00061.  Create menu
2.  Modify menu
3.  Create menu set
4.  Modify menu set
5.  Display menus
6.  Delete menus F    Type menu option number, <RETURN> to end:  F    Security code:  %c F    Type new security code, <RETURN> for no change:  K    New security code:  %c P    Menu action steps: <    Type name of menu or menu set, <RETURN> to end list:  <    Menu name:  %s F    Security code:  %s <    Revision code:  %s     Title:  %s     Comment:  %s N    Type <RETURN> to continue, <CTL-II> to end:  A    Invalid format for b-tree node number %d. I    List the keys? (yes/no):  P    The file cannot be repaired. I    Repair the file? (yes/no):  I    Do you want to delete this operator? (yes/no):  <    Format Diskette Utility F    Start the format? (yes/no):  <    Format in progress. <    Verify in progress. P    PLEASE WAIT P    Unexpected end of device. P    Insert a diskette into drive.
WARNING:  Format will destroy all data on the diskette. P    Printer buffer overflow. P    BAD BLOCKS: N    Format complete with no errors.
Remove the diskette.  Then type <RETURN> to proceed:  P    Printer is out of paper. K    bad blocks were found.  No filesystem was created.     MENUS
all
selected P    Creating filesystem P    Printer is not on-line. P    Printer names:  P    Attempt to unlock a file that is busy. P    There is no tape in the tape drive. P    Possible tape read error. P    Type number of printer, <RETURN> for default printer:  <    Menu Editor <    2. Date of install:  <    3. Release number:  <    4. Public ID length:  <    5. Public ID:  <    6. Required products:  <    7. Minimum OS level:  (    8. Comment:  <    Type the name of the level file (<RETURN> = "level"):  <    Type installation date (mm/dd/yy, <RETURN> = todays date):  F    Type release level, <RETURN> for no change:  F    Type length of public ID, <RETURN> = none:  7    Type public ID, <RETURN> = none:  <    Type product component, <RETURN> for no change:  <    Type minimum OS level, <RETURN> for no change:  P    Type short description (max 40 chars):  <    Generate Release Level Utility <    1. Creation date:  A    Type release creation date (mm/dd/yy, <RETURN> = todays date):      day/month/year     year/month/day     month/day/year     12-hour clock     24-hour clock P    Cannot read the date.  System error. P    Cannot read the time.  System error. <0002Time format
     1. hours:minutes
     2. hours:minutes:seconds <    Type time in format hhmmss, <RETURN> for no change:      am     pm <000212-hour clock half day choice
     1. morning (am)
     2. evening (pm)  <    Port Configuration Utility (    ADD A DEVICE (    REMOVE A DEVICE (    MOVE A DEVICE (    SWITCH TWO DEVICES (    REPORT PORT ATTRIBUTES (    MODIFY PORT ATTRIBUTES 	    PORT     STATUS <    Type the port number, <RETURN> to end:  F    Type number of device:  P0006Protocol options
   1.  no protocol         4.  X-ON, X-OFF, and DTR
   2.  X-ON, X-OFF         5.  modem control
   3.  DTR                 6.  modem control and X-ON, X-OFF I    Does this printer use Basic Four interface? (yes/no):      Device type:      Terminal type:      Device name:      terminal     printer     even     odd     none P0003Device type
   1. terminal
   2. printer
   3. graphics terminal P0016These are the possible baud rates (bits/second)
1.   50        5.   150         9.  1800        13.   4800
2.   75        6.   300        10.  2000        14.   7200
3.  110        7.   600        11.  2400        15.   9600
4.  134.5      8.  1200        12.  3600        16.  19200 P0003These are the parity options
     1.  no parity
     2.  odd parity
     3.  even parity P0003These are the options for the number of stop bits
     1.  1
     2.  1.5
     3.  2 P0002These are the options for the character length (in bits)
     1.  7
     2.  8 I    Start spooling for this printer? (yes/no):      Start process:      Comment:  7    These are the translation table files.     Parity:      Stop bits:      Character length:  P    These are the available printer types F    Type number of item to change, <RETURN> for no change:  P    Type the start process command, <RETURN> for no change:
 <    Type comment, <RETURN> for no change:  F    Type number of printer:  <    Remove the device from this port? (yes/no):  F    Type the port number of the device to move, <RETURN> to end:  F    Type the destination port number for the device:      Not configured P0006Port configuration options
     1.  Add a device          4.  Switch two devices
     2.  Remove a device       5.  Report port attributes
     3.  Move a device         6.  Modify port attributes P    This port is not configured. P    This port is already configured for a device. F    Type number of item to change, <RETURN> to define device:  I    Do you want to modify it? (yes/no):  I    Do you want to add a device to it? (yes/no):  P    These are the available terminal types <    Type name of installation procedure file:  <    Type "ignore directory" path name:  <    Release Utility P    No filelists have been created. P    Printer devices <    File "%s" not found. <    %s is not a menu set file. <    Message & Help File Compare & Merge Utility <    Type name of old ENGLISH message text file:  <    Type name of new ENGLISH message text file:  <    Type name of old TRANSLATED message text file:  <    Type name of destination text file for merge:  <    1. Old ENGLISH message file:  <    2. New ENGLISH message file:  <    3. Old TRANSLATED message file:  <    4. Destination file for merge:  <    5. Report device:  <    Operator name "%s" does not exist. P    The queue file for the requested printer does not exist. P    Missing record in file "%s". P    The requested print form is not defined. P    Attempt to LOAD an illegal file type. P    Attempt to delete primary key set from file "%s". P    <CTRL>+"y" was typed. P    Illegal usage of input statement. P    The print control defaults file, "/etc/defaults", is corrupted. P    Print spooling program failed in attempt to create a temporary file.     Input translation file:      Output translation file:      Printer type:      Basic Four interface:      Spooling:      Input baud rate:      Output baud rate:      Protocol:  A    The job number is %d N    Type <RETURN> to continue, <CTL-II> to update status:      idle
formchange
working
offline
paper
error
mnemonic error
startup error A    Type number of job action, <RETURN> to end:  <    Class name:  P    No class name has been specified. P    Class name "%s" is undefined. P    Printer name "%s" is undefined. P    Illegal file name. P    Error in reading default values from "/etc/defaults" or "/etc/class". <    Type class name, <RETURN> to continue:   P    Your defaults specify spooling to be off.  This program requires spooling on.
Type <RETURN> to turn spooling on, <CTL-II> to go back, <CTL-IV> to end:  P    No printers have been started. P    The job is not found in the print queue. P    The printer has not been started. P    These are the available printer names P    Diskette is full. <    Destination device:  P    Program abort P    LOOKING FOR SOURCE DEVICES P    LOOKING FOR DESTINATION DEVICES P    PROGRAM IS DONE P    This diskette does not belong to the current save set. N    Insert the correct diskette, then type <RETURN>:  <    Source device:  P    RESTORING  P    This is not the correct diskette. P    The file was not changed. P    MODIFYING  P    The two passwords are not identical. P    No security codes are assigned. <    Change Print Form Utility F    Type printer name whose form was changed, <RETURN> for default:  P    Resuming printing on "%s". P    Error on printer.  Cannot resume printing. F    Type the number of the first port, <RETURN> to end:  F    Type the number of the second port:  P    The port numbers are the same.  You cannot move or switch a port with itself. (    Do you want to modify it? (yes/no):  (    Do you want to create it? (yes/no):  P    Initial and growth extents are greater than the maximum number of records. P    Initial extent is greater than the maximum number of records. P    Growth extent is greater than the maximum number of records. <    "%s" is not a menu file. F    What part of the menu do you want to edit <    Type initial extent size (1-%d records):  <    Type initial extent size (1-%d keys):  <    Type initial extent size (1-%d blocks):  <    Type growth extent size (1-%d records):  <    Type growth extent size (1-%d keys):  <    Type growth extent size (1-%d blocks):  P    Invalid major and minor device numbers for system console "%s". P    WARNING: Invalid entry in "/etc/ports" port configuration file. P    WARNING: Invalid entry in "/etc/terminals" terminal configuration file. P    WARNING: Invalid entry in "/etc/printers" printer configuration file.  0000DELETED P    Cannot change the name of the system console "%s". P    You cannot move or switch port 2, the parallel printer device. P    There is not enough memory.  <    Delete menu "%s"? (yes/no):  (    Number of records (    Bytes used K    The system configuration allows %d printers.  You have specified more. P00021. Configure system as defined
2. Modify configuration parameters P    These are the devices that can be formatted     yes     no N    Format complete with errors. N    No working directory is defined for this user.  Type <RETURN> to abort:  P    You cannot remove or move the system console. N    Type number of selection, <RETURN> for next page:  N    Type number of selection, <RETURN> for next page, <CTL-II> for previous page: N    Type number of selection, <CTL-II> for previous page:  I0000Save this menu set definition? (yes/no):  <0000Type name of directory owner, <RETURN> for no change:  (0000Directory owner:  (0000Directory access parameters:  P0000Illegal value for pitch in form definition. P0000Printer "%s" is not waiting for a form change. P0000Initial menu cannot be set unless initial program is "menus". <0000Type home directory, <RETURN> for no change:  0000menus
command interpreter
BASIC command mode <0000Type operator name, <RETURN> for no change:  N0000Source diskette will be fd0.  Type <RETURN> to proceed:  N0000Destination diskette will be fd0.  Type <RETURN> to proceed:  F0000Type number of selection, <RETURN> to proceed:  (0000Writing "%s". <0000Writing device files to "/dev". 0000no translation P0000Diskette seek error.  Please insert another diskette. P0000Diskette error. P0000No files restored. P0000You are not allowed to change the device type of the parallel port. 0000Input translation.  0000Output translation.  H0000WARNING: Changing the device type will remove all the current port
         parameters.  Proceed? (yes/no):  I0000Set the parameters to the defaults for the new device? (yes/no):  (0000No printers are configured. P0000Growth extent cannot be zero. <0000COMPLETE  K0000Type number, <CTL-II> for previous page, <RETURN> for no change:  <0000Message number  %5d     NEW <0000Message number  %5d     DELETED  <0000Message number  %5d     CHANGED <0000Message number  %5d     REMOVED P0000Fatal file read or write error. F0000Type number of item to change, <RETURN> to define operator:  P0000NOTICE:  Configuration changes will not occur until system is re-booted. P0000WARNING:  This program should be executed ONLY in single user mode. 0000SUB-DIRECTORIES
yes
no P0000The directory is empty or does not contain any files of the correct type. <0000Type name of program to be merged:  0000WRITE VERIFY
no
yes <0000Eventcount "%s" already exists. (0000Directory "%s" already exists. 0000DUPLICATES
replace
ask user P0000Working directory path changed. 0000CONTIGUOUS
yes
no P0000Starting page number is greater than ending page number. <0000Type printer name, <RETURN> for no change:  K0000Type number of item to change, <RETURN> to submit the job:  P0000The filesystem is full.  0000DELETED  0000DELETED P0000The full path name of the file is longer than 128 characters. P0000Not enough disk space available to perform copy. K0000Illegal character:  %s <0000The report will be printed on "%s". P0000You are not allowed to change this parameter for the system console. P0000This file is busy. I0000Change the start process to the default for this device? (yes/no):  P0000Disk read error. <0000Menu set name:  <0000Revision code:  (0000Comment:  <0000Default menu name:  <0000Menu name:  F0000Security code:  (0000Title:  N0000Type number of job to process, <RETURN> to update status:  P0000File name is too long.  Cannot append ".txt" to file name. P0000WARNING:  Menu "%s" does not exist. P0000WARNING:  File does not exist. K0000Type number of item to change, <RETURN> when all are correct:  P0000Attempt to start an invalid device. P0000The terminal is busy. P0000The printer is not defined. P0000Illegal priority for print job. P0000Illegal value for print job requeue flag. P0000Illegal value for print job spool flag. P0000Illegal value for print job wait flag. P0000Form name for print job is undefined. P0000Illegal value for page length in form definition. P0000Illegal value for page width in form definition. P0000Illegal value for printer slew in form definition. P0000Illegal lines per inch value in form definition. P0000Printer translation table doesn't exist or cannot be accessed. P0000Illegal value for hand sheet feed in form definition. P0000Ghost task not ready to communicate. P0000I/O contention error between the ghost task and the system. P0000Attempt to open a ghost task that is already open. P0000Not enough memory to perform communication with ghost task. P0000Attempt to write too many characters to ghost task. P0000Ghost task timeout. P0000There is no diskette in the diskette drive. P0000Illegal or unknown mnemonic issued to printer. P0000Duplicate alternate directory. P0000Too many alternate directories. P0000Keyboard buffer overflow. P0000Printer out of ribbon. P0000Printer I/O error. P0000Attempt to perform a buffered operation on an unbuffered device. P0000Local area network communication error. P0000Local area network communication failure at remote system. P0000Local area network timeout. P0000The local area network remote system doesn't support the requested service. P0000Local area network support program file is corrupted. P0000Local area network operations caused system overload. P0000Local area network support program failed and was automatically restarted. P0000Local area network overload:  not enough dynamic sockets. P0000Local area network support program failed. P0000Local area network socket timeout error. P0000Not enough local area network buffers available. P0000Local area network controller is disabled. P0000Local area network controller is not installed or is not working. P0000Local area network duplicate station address. P0000Local area network controller is disabled. P0000Local area network remote station doesn't respond. P0000Memory overflow on local area network remote system. P0000Operator file on local area network remote system is damaged. P0000You are not authorized to use the local area network remote system. P0000Not enough memory to perform local area network remote file copy. P0000"%s" is a remote file. P0000The operator file is busy. <0000Message number  %5d     MISSING MESSAGE ADDED (0000** access permission denied ** P0000The old and new ENGLISH files are identical. (0000** file is locked ** <    Illegal menu name "%s". <    Illegal menu set name "%s". P0000MOUNT A FILESYSTEM P0000UNMOUNT A FILESYSTEM P0000DISPLAY WHAT IS MOUNTED P0000No filesystems are mounted. P0000CREATE BACKUP FILE
yes
no I0002Verify the format? (yes/no):  K0000Type number of selection, <RETURN> for no verify:  (0000The type is  (0000The BFS type is  0000string
indexed
serial
direct
sort
BASIC program
encrypted BASIC program
unknown 0000unused
small
large
contiguous
unbuffered
buffered
huge
event
remote
unknown P0000Attempt to write to an illegal block number. P0000Attempt to read a block number that is too large. P0000No errors detected by 'fschk'. P0000Error return from 'fschk'. P0000Errors were detected by 'fschk'. P0000WARNING:  This device may not be a filesystem.
          The filesystem header may only be repaired manually. P0000This part of the utility can be executed only by the system administrator. P0000No devices are present on the system. P0000Device "%s" will be used. P0000There are no menu options defined. F0000Delete menu set "%s"? (yes/no):  0000str 0000dir 0000ind 0000pgm 0000ser 0000srt  0000DELETED 
0000MAX
SIZE 20000CHANGE PASSWORD F0000The operator file, "/etc/passwd", does not exist.
Do you want to create it? (yes/no):  K0000Growth extent will be 0.  Type <RETURN> to continue:  <0000Access permission denied (0000** file not found ** F0000Type number of keys (1-8388607):  F0000Too many menus are active. 20000Number of keys:  P    WARNING: Invalid entry in "/etc/defaults" port configuration file. (0000Type starting date in format  (0000Type ending date in format  0000dd/mm/yy 0000yy/mm/dd 0000mm/dd/yy 
0000hh:mm:  
0000hh:mm xx:  P0000Invalid date or time. <00061. Add
2. Delete
3. Display
4. Sort
5. Change environment
6. Save
 <00051. Add
2. Delete
3. Display
4. Sort
5. Change environment <    Type a file or filelist name to add, <RETURN> when done:  <:   Type a file or filelist name to delete, <RETURN> when done:  P0000Date out of range P0000Path name too long #0000Date modified range:  0000Working directory 0000Starting date 0000Ending date 0000EXPANSION
yes
no 0000FILE TYPES 00001. indexed 00001. serial 00001. direct 00001. sort 00001. BASIC program 00001. BASIC program, encrypted 00001. string 00001. directory 00001. eventcount 00001. device <00051. Add
2. Delete
3. Display
4. Sort
5. Save <00041. Add
2. Delete
3. Display
4. Sort <0000Unexpected end of file on directory for save set "name". P0000Starting date must be less than ending date. <0000Save to Magnetic Tape Utility N0000Insert / Load a tape.  Type <RETURN> when ready:  (0000Save set name:  P0000Save set date:  (0000Save set time:  (0000Tape set name: (0000Tape ID:  (0000Tape serial number: (0000Tape volume number: (0000Originating system: (0000Tape format: (0000Date first labeled: (0000Date last labeled: (0000Time last labeled: N0000Type number of item to change, <RETURN> to label tape:  P0000    TAPE LABEL
------------------ I0000Is this the correct tape? (yes/no):  0000SAVED FILE:  0000VERIFY
no
yes P0000Type number to change option, <RETURN> when all correct:  0000ERROR HANDLING
log and continue
log and ask user
no error log 0000REPORT DEVICE
terminal
printer
file
no report (0000FILES TO SAVE:  (0000FILES SAVED:  P0000WARNING:  Tape format is not "backup". P0000WARNING:  This tape was not written on an BOSS/IX system. P0000WARNING:  This is a boot tape. P0000Cannot write tape label. <0000Type save set name:  (0000Bad label format (0000No label P0000WARNING:  Labeling the tape will destroy the current data. (0000FILE NAME 
0000TYPE 
0000BLOCKS 0000DATE I0000Do you want to label this tape? (yes/no):  I0000Is this the correct tape? (yes/no):  0000TOTAL FILES SAVED:  0000TOTAL BLOCKS SAVED:  I0000Restore from Magnetic Tape Utility P0000Do you want to append to this tape? (yes/no):  000013XX 0000S80 0000BOSS/VS 0000BOSS/IX 0000Unknown 0000Backup 0000Dump 0000Intersystem 0000Boot N0000No files were specified.
Type <RETURN> to enter file names, <CTL-IV> to abort:  P0000FILES SAVED
----------- P0000FILES NOT SAVED OR PARTIALLY SAVED
---------------------------------- P0000VERIFY REPORT
------------- P0000SUMMARY:  <0000files compared correctly  0000DELETED  0000DELETED  0000DELETED  0000DELETED  0000DELETED  0000DELETED F0000Do you want to copy another diskette? (yes/no):  P0003Copy another diskette?
     1. Yes, re-copy same diskette
     2. Yes, copy another diskette
     3. No  0000DELETED  0000DELETED  0000  0000DELETED  0000DELETED  0000DELETED 0000Part of the file is missing. P0000Ending date must be greater than starting date.  0000DELETED  0000DELETED  0000DELETED  0000DELETED :0000File cannot be opened on disk.
 (0000OK <0000Disk =  <0000File sizes are different.
 <0000Tape =  <0000files did not compare.
 <0000File types do not match.

  0000DELETED 0000Files differ at byte %d.  0000DELETED #0000Cannot read key data from tape.

 :0000Cannot read file on disk.
 :0000Cannot read file on tape.  0000DELETED 0000String 0000Device 0000Event 0000Indexed 0000Serial 0000Direct 0000Sort 0000Keyed 0000BASIC Pgm 0000Encrypted N0000Type name of save set to compare:  P0000The tape is not labeled. P0000Read error.  The label cannot be read. 0000Directory P0000SEARCHING FOR SAVE SET  0000DELETED P0000COMPARE REPORT P0000PROGRAM COMPLETED.  REMOVE / UNMOUNT TAPE. P0000VERIFY:  %d COMPLETE L0000Is this the correct tape? (yes/no):   0000Sizes:  0000Byte:  <0000Compare Magnetic Tape Utility 0000Disk =  P0000This tape is full.
Insert / Load another tape.  Type <RETURN> when ready:   0000DELETED P0000date:  P0000time:   P0000error =  P0000vol =  P0000action =   0000DELETED P0000Continuation file P0000Cannot find save set "%s".  0000DELETED  0000DELETED  0000DELETED P0000Tape is not labeled or the label is bad.  0000DELETED  0000DELETED P0000Insert / Load tape number %d.  Type <RETURN> when ready:  P0000Dir  0000DELETED P0000CONTINUATION FILES P0000VOLUME  0000DELETED P0000REWINDING TAPE  P0000Insert / Load tape number %d.  Type <RETURN> when ready:   0000DELETED P0000The bad block is in file %s in partition %d on disk %d.
Type <RETURN> to continue. 20000Illegal block number %d in file %s 20000Inode %d is file %s <0000File %s had a bad or duplicate block number. <0000File %s has a bad or duplicate block number. 20000Illegal inode number %d in directory %s <0000Program "%s" could not be executed. P0000ERASING TAPE AND WRITING LABEL P0000SEEKING END OF DATA P0000REWINDING <0000COMPILING LIST OF FILES TO SAVE:  <0000VERIFYING <0000File "%s" is continued from previous tape. (0000continued from previous tape (0000Save set: P0000PROGRAM COMPLETED.  REMOVE / UNMOUNT TAPE. (0000Report file:  (0000Error log file:  0000FILE SELECTION
single file
selected files <0000Menu "%s" not found. <0000"%s" is not a menu file.  Invalid format. <0000Report Magnetic Tape Contents Utility <0000Label Magnetic Tape Utility (0000FILES TO RESTORE:  (0000FILES RESTORED:  0000RESTORING FILE:  <0000Type name of save set to restore:  <0000Type name of save set to list:  (0000** file/directory path name too long ** (0000** cannot access directory ** P0000Some directory in the path name does not exist. P0000Working directory path is too long. (0000Read/status timeout:  (0000Write timeout:  F0000Type timeout value (1 - 5000 seconds), <RETURN> for no change:  0000REPAIR MODE
analyze
analyze & repair
retire bad block <0000File Analysis and Repair Utility <0000Type name of template file, <RETURN> for none:  P0000Tape has been labeled. I0000Do you want to label this tape? (yes/no):  P0000The list is full.  You cannot add another item. I0000Do you want to specify template files for keyed files? (yes/no):   0000DELETED P0000The save set is a filesystem image.  0000DELETED P0000Unknown fatal error occurred on tape drive. P0000Cannot set access modes and/or owner of this file.  Cannot restore file. 0000SKIPPING FILE:  0000Slave printer type:  0000Slave printer (0000Slave printer attached:  0000terminal with slave I0000Is this a graphics printer? (yes/no):  I0000Is this a graphics terminal? (yes/no):  I0000Is a slave printer attached to this terminal? (yes/no):  0000communications port P0000Type item to add to list.  <SPACE> to move cursor to next item.
<CTRL>+"d" to delete item under cursor.  <RETURN> to end edits. <0000MAINTAIN CLASS DEFINITIONS I0000The class definition already exists.
Do you want to modify it? (yes/no):  I0000The class definition does not exist.
Do you want to create it? (yes/no):  0000TOTAL FILES RESTORED:  0000TOTAL BLOCKS RESTORED:  P0000WARNING:  This save set was not generated from this system.  When the files
          are restored, the file owners might not match the original owners. <0000COMPILING LIST OF FILES TO RESTORE:  P0000Cannot position to start of file that holds list of files to restore. 0000Class name 0000Delete 0000Spooling 0000Despool wait 0000Pitch 0000Translation table 0000Hand sheet feed 0000Slew 1 0000Slew 2 0000Slew 3 0000Slew 4 0000Slew 5 0000Slew 6 %0000Slew 7 0000Slew 8 <0000Type operator or printer name, <RETURN> to end:  <0000CREATE CLASS DEFINITION <0000MODIFY CLASS DEFINITION <0000DELETE CLASS DEFINITION <0000REPORT CLASS DEFINITIONS I0000Do you want to delete this class definition? (yes/no):  P0000Class definition not found in "/etc/class". P0000Default name is not an existing operator or printer. P0000Only the system administrator can change the name in a default definition. I0000WARNING:  The first save set on this tape is continued from the
          previous tape.
Continue the restore with the current tape? (yes/no):  P0000File: %.72s
    cannot be restored, it is continued from the previous tape.
 0000DESPOOL
WAIT 0000FORM
NAME 0000SPOOL 0000LPI 
0000PIT 
0000TRANS
TABLE 0000SLEWS:  1   2   3   4
        5   6   7   8 0000CLASS NAME 
0000HAND
FEED 
0000LEN 
0000WID 0000Graphics terminal:  F0000%d bad free data record(s). F0000Data record number %d doesn't match keys. F0000%d data records missing. P0000%d duplicate free data records. P0000Error in template file.  Cannot continue with repair of this file. P0000Disk error.  Cannot delete index node %d. P0000Disk error.  Cannot open file "%s". P0000Disk error.  Cannot open keyed portion of file. P0000Disk error.  Cannot read b-tree node %d. P0000Disk error.  Cannot read dictionary node. P0000Disk error.  Cannot read free index list.  P0000Disk error.  Cannot read free index node. P0000Disk error.  Cannot read key index node. P0000Disk error.  Cannot read node %d. P0000Disk error.  Cannot remove item from index. P0000Disk error.  Cannot write data record. P0000Disk error.  Cannot write dictionary node. P0000Index node %d needs repair. P0000Invalid b-tree format. P0000Invalid data in record number %d. P0000Invalid data in statement numbers %d through %d. P0000Invalid key descriptors. P0000Invalid variable tables.  New variable names will be assigned. P0000Record numbers %d to %d were lost. P0000Records number %d to %d are combined in record %d. P0000Record numbers %d to %d are damaged. P0000Variable tables are damaged beyond repair. P0002The report file already exists.
     1. Replace
     2. Append
 P0000SAVING DEFAULT DEFINITIONS P0000SAVING CLASS DEFINITIONS P0000SAVING FORM DEFINITIONS P0000Invalid pitch value in form "%s". P0000Invalid lines per inch value in form "%s". P0000Invalid translation table name. I0000TESTING frepair: Should this block be considered bad? (yes/no):  P0000TESTING frepair:  Block #: %d    Filesystem: %s P0000TESTING frepair:  Add to bad block table? (yes/no):  P0000Invalid parameter.  One of the parameters in the record is illegal. P0000The specified slave printer cannot be used with this terminal type. P0000You must specify values for all fields in the "system" default definition. P0000You must specify values for all fields except slews in the "stanrd" form. P0000You are not allowed to change the name of the "system" default definition. P0000You are not allowed to change the name of the "stanrd" form. I0000Do you want to align the form? (yes/no):  I0000Type number of item to change, <RETURN> to define slave printer:  
0000DEVICE P0004Device type
   1. terminal
   2. printer
   3. graphics terminal
   4. communications P    The "stanrd" form definition is not found in the "/etc/forms" file. I0000Defaults file, "/etc/defaults", does not exist.  Create it? (yes/no):  I0000The class file, "/etc/class", does not exist.  Create it? (yes/no):  I0000The forms file, "/etc/forms", does not exist.  Create it? (yes/no):  P0000A default definition with that name already exists. P0000A class definition with that name already exists. P0000A form definition with that name already exists. 20000Type class name, <RETURN> to end:  P0000Some of the printers don't exist.  They will be deleted from the list. 0000File name:  %s P0000Cannot perform verify without generating a report. <0000Type the name of the special printer:  P0000Communications can only operate from port 1. 0000(spooling is off) (0000%d errors detected (0000%d bad blocks detected P0000PROGRAM ABORTED.  THE LAST FILE IN THIS REPORT MIGHT NOT HAVE BEEN REPAIRED. P0000Cannot read filesystem name (major device number %d, minor number %d). 0000File type:  %s P0000Only the system administrator can repair a file. (0000Wait mode:  (0000Raw mode:  I0000Don't print the file until it is complete? (yes/no):  I0000Print file in raw mode? (yes/no):  P0000You cannot move a spooled print job to an un-spooled printer. 0000wait 0000raw 0000Plotter name:  0000Plotter parameters:  (0000Type plotter name:  (0000Type plotter parameters:  0000Graphics terminal name:   0000Graphics terminal parameters:  20000Type graphics terminal name:  20000Type graphics terminal parameters:  I0000Rewrite the data from this tape on another tape? (yes/no):  P0000SAVE TO TAPE ERROR LOG P0000RESTORE FROM TAPE ERROR LOG P0000File "%s" is not found in the save set directory. P0000Disk read error.  Cannot access save set directory. P0000Cannot restore "%s".  The data is missing from the tape.  0000DELETED P0000Tape read error.  Cannot continue restore. P0000The bad block table has overflowed. F0000%d data records or keys are missing from the file. P00031. Process the file
2. Skip the file
3. Abort P0000Cannot create backup for file "%s". P0000FILES NOT RESTORED
------------------ P0000No errors occurred. P0000No files deleted. 0000FILESYSTEM:  0000Initial extent (keys) 0000Growth extent (keys) D0000Type filelist name, <RETURN> to end:  D0000Type filelist name, <RETURN> to continue:  P0000Illegal parameter in form definition. P0000Illegal translation table name specified for printer. P0000Printer is busy. P0000Unknown printer error. P0000Cannot submit job to print queue. P0000Cannot read status of printer. P0000Illegal value for printer timeout. P0000Slave printer configuration error. P0000This printer does not use a print queue. <0000Type the file name, <RETURN> for no change:  P0000The file was repaired. P0000The class file, "/etc/class", is corrupted. P0000The forms file, "/etc/forms", is corrupted. 0000Image dump of filesystem "%s" 0000Old format program file. P0000No BASIC printers configured. P0000The sample form has been printed. P0000Cannot create temporary file. <0000  TAPE QUALITY REPORT
------------------------ 0000Volume
Number 0000Recovered
Errors 0000Blocks
Written 0000Blocks
Read F0000Type the date when the job should be printed (mm/dd/yy):  F0000Type the date when the job should be printed (dd/mm/yy):  F0000Type the date when the job should be printed (yy/mm/dd):  F0000Type the time when the job should be printed (hh:mm xx):  F0000Type the time when the job should be printed (hh:mm):  0000Date to print:  0000Time to print:  P0000The specified form cannot be used on this printer. P0000Invalid message number requested. <0000Type file or directory name, <RETURN> to end:  <0000Security Utility (0000Owner:  (0000Access parameters:  <0000Type name of new owner, <RETURN> for no change:  0000DIRECTORY CONTENTS
don't delete
delete P0000This program must be owned by the system administrator. P0000Page %d of %d P0000Type the port number,  P0000Type the port number of the device to move,  P0000Type the destination port number for the device,  P0000Type the number of the first port,  P0000Type the number of the second port,  P0000<RETURN> to end:  P0000<RETURN> for next page, or <CTL_II> for previous page:  P0000<CTL_II> for previous page, or <RETURN> to end:  P0000<RETURN> for next page:  P0000Abnormal return from library subroutine.  P0008Port configuration options
     1.  Add a device			5.  Report port attributes
     2.  Remove a device		6.  Modify port attributes
     3.  Move a device			7.  Save configuration and exit
     4.  Switch two devices		8.  Add non-configured terminals
 P0000No data on tape. P0000Cannot execute BASIC executive. P0000File continuation. P0000Filesystem continuation. P0000Filesystem image dump. P0000Save set continuation. P0000Save set level: P0000Buffered P0000Unbuffered P0000Continue the restore with the current tape? (yes/no): P0000A bad entry in "/etc/printdef" printer default parameter file P0000A bad entry in "/etc/termdef" terminal default parameter file   P0000Release configuration check.

The versions records do not match.

File P0000Version # P0000internal configuration record P0000The byte that failed the test is  P0000WARNING: The text of messages may be non-existent or meaningless.
 P0000Do you want to create command test files?  P0000NUMBER OF KEY SETS P0000PRIMARY KEYSET
 P0000NUMBER OF KEY PARTS  0000DELETED P0000  starting byte P0000  size(bytes) P0000  type P0000DUPLICATES ALLOWED P0000COMPRESSION P0000  duplicate P0000  leading P0000  trailing P0000KEY SET %d P0000multi-key P0000REMARK P0000  (descending) P0000basic P0000basicE P0000replace P0000skip P0000query P0000Invalid FORMAT length P0000Error reading FORMAT P0000Invalid FORMAT node number P0002     TAPE DEVICE
1. 1/4 inch cartridge
2. 1/2 inch reel-to-reel
 P0000COMPARING FILE:  P0000Invalid FORMAT header P0000Invalid FORMAT key P0000Key desc. in FORMAT does not match the internal key desc. P0000FORMAT STRING P0000part%-d P0000Invalid FORMAT hash table P0000Invalid FORMAT field P00001. multi-key P0000Centronics P0000Data Products P0002These are the options for the parallel interface type
     1.  Centronics
     2.  Data Products P0000Parallel interface type: 0000Raw mode 0000High bit on 0000RAW 0000HIGH
BIT P0002TAPE DEVICE
1/4 inch cartridge
1/2 inch reel-to-reel 0000FORM
FEED 0000Initial formfeed P0000Cannot set access modes of this file.  Cannot restore file. P0000Cannot set owner of this file.  Cannot restore file. P0000Form feed: P0000PDF name: P0000Trans. tbl: P0000High bit: P0000Type PDF name, <RETURN> for no change:  P0000Type translation table name, <RETURN> for no change:  P0000Type number of initial formfeeds (0 - 9), <RETURN> for no change:  P0000Reverse the high bits? (yes/no):  P0000Cannot read save set header. P0000Invalid PDF name P0000Invalid translation table name <    Error Log Utility     FUNCTION
display error log
initialize error log F    WARNING: The error log should be initialized in single user mode
Type <RETURN> to continue, <CTL-IV> to end:  P0000Cannot find continuation of file '%s'. P0000Cannot initialize/open tape.  P0000Load tape %d. P0000Cannot find file. P0000Cannot find filesystem. P0000Tape not part of this set. P0000Wrong volume number. P0000Not a continuation file. P0000Not a continuation filesystem. P0000Save set not continued. P0000The spooling option for a slave printer must be set off.  P0000Cannot find file on tape. P0000Key portion of file missing. P0000No data found. P0000MultiKey P0000aborted P0000continued P0000retried P0000skipped F0000The forms file, "/etc/forms", does not exist. P0000%s is missing. P0000Error log initialized, Type <RETURN> to continue :  P0000Display complete, Type <RETURN> to continue :  P0000Type <RETURN> to continue :  P0000This tape is part of the current tape set. 
Type <RETURN> to continue. P0000Cannot read save set. P0000SAVING CONTINUATION SAVE SET P0000Cannot write save set header. P0000File not locked P0000WARNING:  System console has been moved.  Please update the parameters 
	  for the system console. P0000Invoke trace function? (yes/no):  P    Not enough room in the filesystem to repair file.
Type name of directory to use for repair, <RETURN> to skip 
the file:  P0000Cannot open %s file. P0000Cannot get status of %s file. P0000Cannot read primary key description from %s. P0000Cannot delete %s file. P0000Can't replace %s file. P0000Can't create %s file. P0000A data write error occurred on %s. P0000A data read error occurred on %s. P0000Can't open key portion %s. P0000A key read error occurred on %s. P0000Unable to open file %s. P0000Unable to set access modes of %s. P0000Unable to set owner of %s. P0000This file is skipped. <0000Ghost Task Communication Utility P0000Station P0000Records
Written P0000Records
 Read P0000Repair mode: %s P0000Repair mode: P0003
1. Define initial system configuration
2. Update system configuration
3. Modify OS parameters P0000System Configuration Utility P0000SYSTEM CONFIGURATION MENU P0000Number Of Users			=  P0000Number Of Printers			=  P0000Number Of Ghosts 			=  P0000Number Of MAGNET Tasks		=  P0000Type number of item to change, <RETURN> to define the configuration:  P0000Type number of terminals, <RETURN> for no change:  P0000Type number of printers, <RETURN> for no change:  P0000Type number of ghosts, <RETURN> for no change:  P0000Type number of MAGNET tasks, <RETURN> for no change:  P0000Unable to set access modes of "%s" file. P0000Operating System Parameters: P0000Number of disk buffers (buffers)		=  P0000Number of printers (printers)		=  P0000Number of processes (procs)		=  P0000Number of file locks (locks)		=  P0000Shared text segments (tsegs)		=  P0000Tty input buffer size (ibsize)		=  P0000Tty type-ahead buffer size (tbsize)	=  P0000Number of mountable filesystems (mfsys)	=  P0000Number of logical units (lus)		=  P0000Number of file descriptors (fds)		=  P0000Number of eventcalls (eventcalls)		=  P0000Number of directory cache entries (dirc)	=  P0000The proposed conf file configuration parameters will require the 
following percentage of total memory available:   P0002Type number of item to change or <RETURN> for next page, <CTL_II> for
previous menu, <CTL_III> to save, <CTL_IV> to abort :  P0000Type number of buffers, <RETURN> for no change:  P0000Type number of processes, <RETURN> for no change:  P0000Type number of file locks, <RETURN> for no change:  P0000Type number of shared text segments, <RETURN> for no change:  P0000Type tty input buffer size, <RETURN> for no change:  P0000Type tty type-ahead buffer size, <RETURN> for no change:  P0000Type number of mountable filesystems, <RETURN> for no change:  P0000Type number of logical units, <RETURN> for no change:  P0000Type number of file descriptors, <RETURN> for no change:  P0000Type number of eventcalls, <RETURN> for no change:  P0000Type number of directory cache entries, <RETURN> for no change:  P0000This "%s" is an invalid selection, please select again. P0000Number of dynamic LAN sockets (dsockets)	=  P0000Number of LAN buffers (lanbuffers)		=  P0000ERASE character (ERASE)			=  P0000Linekill character (linekill)		=  P0000Startup mode (single/multi) P0000Boot mode (secure/nonsecure) P0000System dump on crash (dump/nodump) P0000Override flag (oride/noride) P0000System name (system)			=  P0000Type number of dynamic LAN sockets, <RETURN> for no change:  P0000Type number of LAN buffers, <RETURN> for no change:  P0002Type number of item to change or <CTL_II> for previous menu, <RETURN> or 
<CTL_III> to save the parameters, <CTL_IV> to abort:  P0000Type the ERASE character (key), <RETURN> for no change: P0000Type the Linekill character (key), <RETURN> for no change:  P0000Type startup mode (single/multi), <RETURN> for no change:  P0000Type boot mode (secure/nonsecure), <RETURN> for no change:  P0000Enter system dump on crash (enabled/disabled), <RETURN> for no change: P0000Enter override root left mounted error (enabled/disabled), <RETURN> for
no change:  P0000Type system name, <RETURN> for no change:  P0000BACKUP
no
yes
 P0000			        BACKUP FUNCTION
		1. Save files modified since %2d/%2d/%4d.
		2. Save all selected files and mark current date.
 P0000Error in calculating statement size for REMARK. P0000bad parameter entry in the parameter file. P0000X25 package P000027XX package P0000Number Of 3270 Terminals		=  P0000Number of FTF Tasks			=  P0000"%s" is too large for a system id. P0000Cannot save the configuration file. P0000"%s" is a bad unit number for a boot device. P0000bad magic number. P0002WARNING!! The memory requirement for this configuration exceeds total amount 
of memory for the system. P0000Cannot read save set entry. P0000Well known sockets (sockets)		=  P0000Type number of well known sockets, <RETURN> for no change:  P0000Verbose mode (verbose/silent) P0000Debug flag (debug/silent) P0000Instruction cache (inca/noinca) P0000Data cache (daca/nodaca) P0000File lacks integrity. P0000File was open and modified at system crash P0000Enter the bad block number. P0000You cannot map out a block on a mounted file system. P0000Could not write block to inode one. P0000The bad block is in a directory file - you must run 'fschk'
to repair it.  Type <RETURN> to abort. P0000The bad block is in the system file - it cannot be repaired.
Type <RETURN> to abort. P0000Enter the disk number. P0000Invalid bad block number. P0000Block %d is unused.  Type <RETURN> to map out the block. P0002  1. Repair the file.
  2. Delete the file. P0000Enter the number of your selection.... P0000The bad block is in the the first block of a basic program.
The file cannot be repaired.  Type <RETURN> to continue. P0000The bad block is an indirect address.  You must run 'fschk' to
repair the file.  Type <RETURN> to continue. P0000The file cannot be repaired.  Do you want to delete the file
and map out the bad block.  ( yes or no ) P0000The bad block is in an unused portion of the file. P0000Type number of FTF tasks, <RETURN> for no change: P0000Type number 3270 terminals, <RETURN> for no change: P0000NOTICE: The OS parameter changes will not occur until system is rebooted. P0000Type <RETURN> to continue, <CTL-II> for previous page, <CTL-IV> to abort: P0000Number of ghosts				=  P0000WARNING: %d invalid entries in '%s' configuration file.  P    The boot device is busy.  Cannot mount /dev/boot on /tmp/.boot. P    A bad boot device was read from the nvram.  Cannot use device read. P    A bad magic number was read on the open of the conf file.   P0002
1. Business Application Packages
2. General Purpose Packages F    Type file size (1-128 blocks):  File not locked P0000WARNING:  System console has been moved.  Please update the parameters 
	  for the system console. P0000Invoke trace function? (yes/no):  P    Not enough room in the filesystem to repair file.
Type name of directory to u